The AC15-LP™ 15” x 15” (381 x 381 mm) scale is designed for easy portability and its capacity makes it perfect to weigh military aircraft and general aviation. Featuring Full Integrated RFX® Wireless Weighing Technology, Intercomp's AC15-LP™ Series Scales communicate with a variety of Intercomp indicators and software.
Intercomp's AC30-60™ Scale is the industry standard for high capacity platform weighing. These scales contain no outdated hydraulics or moving mechanical parts. The fully electronic load cells are certified for accuracy and repeatability by U.S. National Institute of Standards and Technologies and European Office of Legal Metrology. They have been tested to over 100,000 cycles for permanence and accuracy conformance over their lifetime. Constructed from aerospace grade machined aluminum, the self-aligning platforms with a proprietary web bridge support provide the utmost in durability and are designed to last. When calibrated using Intercomp manual or auto calibration systems, these platform scales can be tested, corrected and verified in less than one hour, saving valuable time. Meets current USAF Purchase Descriptions and are available via GSA Contract and National Stock Numbers.
The AC40-LP™ 15" x 22" (381 x 559 mm) scale is designed to eliminate the need for long ramps and reduces overall towing distance. With a platform and capacities large enough to accommodate the main gear of a B767, this scale is able to handle most any job. Featuring Full Integrated RFX® Wireless Weighing Technology, Intercomp's AC40-LP™ Series Scales communicate with a variety of Intercomp indicators and software.
Building on decades of aircraft weight and balance experience, Intercomp's AC60-LP™ low profile scale sets the new industry standard for aircraft platform weighing scales. No other fully electronic system incorporates unsurpassed performance of accuracy and repeatability into a single person portable scale that meets the requirements of airlines, MRO's, militaries and manufacturers for narrow and widebody aircraft weight and balance operations. Incorporating Intercomp’s GaugeSense™ Technology, the fully electronic scales and load cells eliminates scale warm up time, shortens time between weighings, and removes the need for centering of tires on the active weighing platform. This is in contrast to older, hydraulically actuated, piezo-sensing scale technology, which results in Intercomp scales providing significant time savings for each weighing procedure. The large active weighing platform enables weighing of even the largest commercial and military aircraft. Scales are constructed from aerospace grade machined aluminum and single person portable to enable rapid deployment and storage of scale systems. Towable storage and transport carts with pneumatic wheels lessen wear on scales during transportation and come with integrated ramps, so technicians never need to lift a scale in and out of the cart. When calibrated using Intercomp manual or auto calibration systems, these low profile platform scales can be tested, corrected and verified in less than one hour, saving valuable time. Meets current USAF Purchase Descriptions and are available via GSA Contract and National Stock Numbers.
The ACII™ Series Scales are a low cost and reliable scale system available to operators for weighing light aircraft to determine center of gravity. The low cost of this series offers complete justification for purchasing an ultra-efficient scale system versus outsourcing the work to an independent weighing service.
Highly Durable Weigh Bridges in a Variety of Lengths! Rugged AX900™ weigh bridges are available in a variety of lengths, capacities and configurations to weigh anything from single to multi-axle vehicles in locations where permanent scale installations are not feasible. Cable-free operation is made possible by embedded radios enabling wireless communication back to a variety of devices, while digital output still allows for cable backup. The AX900™ series also utilizes stainless steel, hermetically sealed, shear beam load cells to weigh loads up to 180,000 lb (80,000 kg) with an accuracy of ±.1%.
With a large, easy-to-read LED display, CS1500™ high performance crane scales are available in capacities up to 10,000 lb (5,000 kg), are NTEP certified, and boast best-in-class battery life. The scale comes standard with RFX® Wireless Weighing Technology enabling cable-free control and monitoring of scales. Also featured are USB/RS232 output, multi-scale communication, and a multitude of remote display options. NTEP Certified Models Available.
High accuracy, compact digital hanging scales for lower capacity applications. The CS200™ is available in capacities up to 500 lb (250 kg) and is extremely compact and lightweight, weighing just 1.6 lb (0.7 kg).
Available in select capacities up to 100,000 lb (50,000 kg), the CS3000™ crane scale features fully integrated RFX® Wireless Weighing Technology and is built to thrive in harsh environments. All crane unit electronics are shock-mounted in a weatherproof case and provide maximum protection against moisture, dust and rough usage. Commercially available batteries offer industry leading battery life, minimizing down time due to battery charging or replacement. NTEP Certified Models Available
Medium-duty, digital hanging scale for light industrial applications. The CS750™ is available in capacities to 1,000 lb (500 kg) and features a swivel hook, large, easy-to-read LCD display, industry-leading battery life and functionality, and NTEP certification available on most models. RFX® Wireless Weighing can be added when ordering. NTEP Certified Models Available.
Intercomp's HH400™ Handheld Weighing Indicator is an ideal wireless remote display for viewing and controlling scales from up to 300' (90 m), line of sight. It offers three display modes, depending on your operational requirements and allows simultaneous viewing of data from up to four links, including total weight. The large, 3.3" (84 mm) graphic display (measured diagonally) is standard with backlight for improved visibility from most viewing angles. Also features output to RFX® Enabled Wireless Printers, Memory Storage, and RS232 output.
Intercomp’s HH60™ RFX Indicator provides the ability to easily process weight related data for monitoring and controlling loads. USB/RS232 output ensures weight records can be stored and downloaded in a variety of ways.
This super bright, 4.5" LED remote display is easy to see and features a built-in Red/Green Stop/Go light. With a visibility range of 250 ft (76 m), this score board features a large, clearly readable alpha numeric display enclosed in a weather-proof housing. Ideal for both outdoor and indoor applications, it features selectable brightness and a non-glare lens for optimal visibility. Its lightweight construction makes it easy to install for a variety of applications, and is the perfect solution for truck, axle and wheel load scale systems.
Low-Profile, Lightweight Digital Wheel Load Scales. Weighing 51 lb (23 kg) with a profile of just 1.5" (38 mm), the LP600™ Low-Profile Wheel Load Scale weighs loads up to 30,000 lb (15,000 kg) per pad with an accuracy of ±1%. They also feature Fully Integrated RFX® Wireless Weighing Technology making it possible to sequentially couple and number scales, as well as link them to a multitude of Intercomp weighing indicators. Additionally, built in solar charging panels virtually eliminate the need to manually recharge batteries between uses. NTEP Certified Models Available.
The LP600-15T™ system weighs axle-by-axle in static mode, using just two scales, while extension levelers keep axle groups on a level plane, providing ±1% accuracy. Ideal for customers weighing heavy vehicles on unimproved surfaces, and can be transported in the trunk of a vehicle and set up by one or two people in under fifteen minutes.
Light Weight, RFX® Wireless Weighing Technology! Intercomp's LP788™ scales offer ideal roadside direct enforcement capabilities, combined with revolutionary RFX® Wireless Weighing Technology and efficient Solar Power. LP788™ Low-Profile Wheel Load Scales measure just 0.82" (21 mm) in height and weigh a mere 38 lb (17 kg), yet they can weigh up to 15 tons per pad. Featuring solar panels which charge both the batteries and power the electronic load cells, scales communicate, cable-free, using Intercomp’s Fully Integrated RFX® Wireless Weighing technology. The completely aluminum structure maximizes the scale's life and greatly reduces overall weight, making these scales ultra portable, a breeze to transport, and greatly ease roadside setup. These scales are ideal for direct enforcement operations and can be easily transported in a standard patrol car or SUV. They are setup in minutes by one person and the data collected is transmitted to Intercomp's rugged PT20™ CPU with printer for processing or analysis.
LS-WIM® Weigh-In-Motion Axle Scale Systems are an ideal alternative to full-length static truck scales. Intercomp’s US-made LS-WIM® system is designed for use in either manned or unmanned applications. The scale can be easily switched between dynamic (in-motion) and static (axle-by-axle) weighing modes, and can provide both individual axle weights and total gross weights. Intercomp's LS-WIM® provides both operational improvements and data-collection efficiency, all at an economical price point due to its small footprint and minimal installation requirements.
The LS630-WIM™ can accommodate nearly any vehicle up to 36 axles and collects individual axle weights and Gross Vehicle Weight (GVW). At vehicle speeds up to 6 mph (10 km/h), the system offers an accuracy of 2 to 3% and ±0.5% in static mode. Wide pads allow for accurate results without the hassle of precise wheel placement, including axles with dual tires. A pair of RFX® Wireless Weighing pads, four roll-up ramps and a wireless indicator, or PC software, can fit in the back of a vehicle and be set up in less than 15 minutes.
The Industry Standard in Digital Wheel Load Weighing. PT300™ scales have been setting the bar for portable, self-contained, compact wheel load scales for decades. Used to maximize legal payloads and reduce maintenance due to overload stress on equipment, these all aluminum, fully-equipped electronic scales are capable of weighing up to 25,000 lb (11,300 kg) with an accuracy of ±1%. They also feature RFX® Wireless Weighing communication between scales and remote indicators, and all PT300™ scales come standard with solar charging panels that virtually eliminate the need to manually recharge batteries between uses. PT300™ scales can also weigh dual-tire configurations by placing the scales under the outside tires, with the inside tires suspended in the air. NTEP Certified Models Available
Built with the same technology as standard PT300™ scales, PT300DW™ scales are wider to accommodate dual or super-single tires and are available in capacities up to 40,000 lb (20,000 kg). PT300™ scales have been setting the bar for portable, self-contained, compact wheel load scales for decades. Used to maximize legal payloads and reduce maintenance due to overload stress on equipment, these all aluminum, fully-equipped electronic scales are capable of weighing up to 40,000 lb (20,000 kg) with an accuracy of ± 1%. They also feature RFX® Wireless Weighing communication between scales and remote indicators, and all PT300™ scales come standard with solar charging panels that virtually eliminate the need to manually recharge batteries between uses.
SW™ Series Scale Systems are designed for weighing anything from tractors to mobile homes and are ideal to ensure weight limits are met to avoid overload fines, ensure accurate information for consumers and reduce stress on equipment.
For applications where viewing a display at the link is not feasible or protection from extreme elements is a must, the TL8000™ Tension Link scale is designed with all of the functionality of the TL8500™, but comes standard with HH400™ (IWH) RFX Indicator, as an alternative to the built-in display. Lightweight, Compact Design for Cranes, Riggers, Shipyards, Construction Sites, Surveyors, Inspectors, and Utilities. When working around overhead loads or near line tensions, accuracy and safety cannot be compromised. TL™ Series Tension Link scales from Intercomp are the industry standard for verifying, controlling, and monitoring overhead loads and line tension while helping to maintain a safe work environment. Tension links are built using aircraft-grade aluminum, stainless steel, or electroless nickel-plated steel alloy, with shock-mounted electronics in a NEMA 4x/IP65 weatherproof enclosure. Intercomp’s Tension Link scales are built to last in capacities up to 175 tons.
When working around overhead loads or near line tensions, accuracy and safety cannot be compromised. The TL8500™ Series Tension Link scales from Intercomp are the industry standard for verifying, controlling, and monitoring overhead loads and line tension while helping to maintain a safe work environment. Tension links are built using aircraft-grade aluminum, stainless steel, or electroless nickel-plated steel alloy, with shock-mounted electronics in a NEMA 4x/IP65 weatherproof enclosure. Intercomp’s Tension Link scales are built to last in capacities up to 175 tons.
A Simple and Easy-to-Use Touchscreen Indicator for Vehicle Weighing. The TS30™ CPU provides the ability to process weight-related data for using static and WIM scales for vehicle weighing, in a self-contained, weather-resistant, hardened case. The CPU features intuitive displays for scale system operation. Weights from single scales, axles, axle groups, and GVW are displayed in real time, with axle spacing calculated in WIM mode. The User Interface allows configurable user and session fields that are included on the ticket created by the built-in printer. Featuring RFX® technology, the TS30™ can wirelessly communicate with static and Weigh-In-Motion Scales saving time and improving safety.
Intercomp’s strain gauge based Strip Sensors are a unique alternative to traditional static truck scales, or low-speed axle scales where vehicle speeds and sites do not allow large civil works. Strip Sensors allow for higher throughput for high-traffic applications, including Freight Terminals, Commercial Fleet facilities, distribution hubs, and other facilities with space limitations. Installed within channels less than 3" (75 mm) in the pavement, Strip Sensors provide lower cost when compared to alternative scale systems due to minimal installation and maintenance requirements.