SCT-40 Signal Conditioning Transmitter and Weight Indicator Display

SCT-40 Signal Conditioning Transmitter and Weight Indicator Display

Download Detailed Brochure

SCT-40 Signal Conditioning Transmitter and Weight Indicator Display

Compact Control 

Designed for PLC systems that require seamless integration of weight data, the SCT-40 provides reliable signal-conditioning function without the cost or bulk of a full size weight indicator/controller. With eight independent load cell channels, the SCT-40 delivers more power and more control in a compact design. The versatile SCT-40 is DIN-rail mountable within a cabinet or control panel, where it converts a scale’s load cell signal to analog output, serial output or a fieldbus protocol. Providing more interface surface than its predecessors, the SCT-40 is more technician-friendly and easier to use, which simplifies scale setup, calibration and operation.

Features

  • LCD display, 60 x 32 mm

  • Supports up to eight independent reading channels for load cells

  • Displays weight, configuration, calibration and error conditions

  • DIN rail mounting

  • Theoretical calibration, real-weight calibration and error conditions

  • Push button or preset tare

  • Converts digital weight to analog output or optional DeviceNet™, Profibus™ or EtherNet/IP™ protocols

  • Supports ASCII or MODBUS RTU protocols

  • Full scale analog cut put with zero setting and PLC correction of analog signal

  • Bit swapping selection for little endian and endian format

  • Three digital inputs, five digital outputs

  • One serial port, RS-232 simplex and RS-485 connection

  • CD manual

Specifications

Power:
Input: 12 -24 VDC
Power consumption: 5W

Excitation Voltage:
5 VDC, 240 mA, 16 x 350 Ω

Analog Signal Input Range:
+/- 39mV

Analog Signal Sensitivity:
0.1 µV/graduation minimum
1.0 µV/graduation recommended

A/D Sample Rate:
600 Hz

Resolution:
Internal resolution: 16 million counts
Weight display resolution: 999,999
System linearity: ± 0.01% full scale

Digital Inputs/Outputs:
3 inputs 5-24 VDC, 5 outputs, 115 VAC/150 mA

Serial Port:
RS-485 or RS-232 simplex supports up to 115,200 bps

Analog Output:
Optoisolated, 16 bit
0-20 mA, 4-20 mA (max 300 ohm)
0-10 VDC, 0-5 VDC (min 10,000 ohm)

Display:
Backlit graphic LCD, transmissive
128 x 64 pixel resolution, 60 x 32 mm visible area

Keyboard:
Five-key tactile keypad
Test, Zero, Tare, Print Menu, Escape, Left and Up, Navigator, Enter

Temperature & Humidity:
Working temperature: -4° F to 140° F (-20° C to 60° C)
Humidity: 85% non-condensing

Dimensions (W x H x D):
SCT converter (W x H x D): 5.82 in x 3.62 in x 2.36 in
(148 mm x 92 mm x 60 mm)

Weight:
1 lb (0.5 kg)

Rating/Material:
DIN rail mount: NEMA Type 1
Sealed enclosure: NEMA Type 4/IP67, plastic enclousre, clear cover, six PG9 cord grips

Warranty:
One-year limited warranty