RoughDeck® HP Floor Scale

The Toughest, Most Accurate Floor Scale Available

The RoughDeck HP’s best-in-class features are enhanced to deliver more reliability and higher performance than ever before. Available in 1,000 to 10,000 pound capacities, the RoughDeck HP is the industry leader for precision weighing in Legal for Trade applications.


The RoughDeck HP’s NEMA Type 4X aluminum TuffSeal junction box is protected from forks and industrial abuse by a six-inch structural steel channel frame and diamond treadplate safety deck. The junction box is also mounted as a handy slide-out tray that eases setup and service access. Cables include sturdy cord grips or a quick disconnect for added convenience. In addition, all load cell cables are enclosed in conduit, alleviating the danger of rough handling. All load cells are recessed within the channel for protection on all sides while maintaining easy access for leveling.


All of our floor scales, unless specified otherwise, are built with lifting holes to assist our dealers during installation, or to later service the scales. The lifting holes are not the same size on all of our scales and in the PDF on the Resources tab or Related Links listed below, you will find a chart that lists the standard size and quantity of eyebolts needed for our scales.

Features

  • Heavy-duty industrial design

  • Structural steel channel frame

  • Four NTEP Certified alloy steel, shear beam load cells

  • 20ft SURVIVOR® EL147HE hostile environment load cell cable

  • TuffSeal® JB4SS stainless steel, NEMA Type 4X junction box with signal trim card

  • Side-access junction box

  • Rugged diamond deck safety treadplate

  • 4 adjustable stainless steel SUREFOOT™ support feet

  • 4 corner overload stops (Canadian versions only)

  • Level bubble (Canadian versions only)

Specifications

End Load Capacity:
200% full scale at 1,000 lb
100% full scale at 2,000 lb, and 5,000 lb
80% full scale at 10,000 lb

Cable Length:
20 ft (6.1m) for connecting junction box to indicator

Threaded Eyebolt:
Hole (1/2-20NF) located in center of deck for easy lifting

Warranty (limited):
RoughDeck HP weldment five years, load cells two years, all other components one year

Approvals:
NTEP CC 92-001, Class III 5,000d
Measurement Canada AM-4827, Class III 5,000d

© 2023 by Lakeshore Scale Inc ~ 131 Coolidge Ave Ste 4 ~ Holland, MI 49423. All rights reserved.