IQ Plus® 2100 Digital Bench Scale
Unmatched Features and Value
The IQ plus® 2100 digital bench scale is ideal for use in general purpose weighing, portioning, and a variety of food processing applications. Stainless steel buttons repel messy ingredient spills and damage by knife point, while the NEMA Type 4X stainless steel indicator enclosure stands up to frequent washdowns. Standard overload stops protect the base during heavy use. All operations are controlled through two buttons—zero and units. Push-button zero and a full range of units, including lb/oz, offer the flexibility needed for a wide variety of applications.
Features
NEMA Type 4X/IP66
304 stainless steel construction
Large, bold 0.8 in light emitting diode (LED) display
Status annunciators: lb, kg, oz, g, negative, motion, center of zero
One full-duplex RS-232 port
Two digital inputs for remote zero, print and units
12 in column, attachment bracket or tilt stand for table, wall or under counter mounting
Aluminum, single-point load cell
Overload and upload stops on scale base
Stainless steel, non-tactile feel, piezo zero and units buttons
Unit of measure: kg, gm, lb, oz, lb/oz (lb/oz is not Legal for Trade)
PreVent™ breather vent
Factory Calibrated
Specifications
Power-AC:
Line Voltages:
115 or 230 VAC
Frequency:
50 or 60 Hz
Power Consumption:
70 mA at 115 VAC (8 W)
35 mA at 230 VAC (8 W)
Display Resolution:
10,000 graduations maximum
Digital Inputs:
Two inputs, TTL or switch closure, active-low
Serial Communications:
Full-duplex RS-232; 9600, 4800, 2400, 1200 bps; seven or eight data bits; even, odd or no parity
Display:
Six-digit light-emitting diode (LED) display
Seven-segment, 0.8 in (20 mm) digits
LED Annunciators:
Negative value, center of zero, motion, kg, g, lb, oz
Keypad:
Two stainless steel piezo switches
Operating Temperature:
14° F to 104° F (-10° C to 40° C)
Rating/Material:
NEMA Type 4X/IP66, stainless steel
Load Cell:
Aluminum, environmentally sealed
Warranty:
Two-year limited warranty
Approvals:
Indicator:
NTEP CC 00-045 Class III/IIIL 10,000 d
Measurement Canada AM-5374;
UL and C-UL listed
Base:
NTEP CC 95-072, Class III 5,000 d