CW-90X Weight Indicator
Built to withstand rough handling and extreme washdown requirements, the CW-90X Weight Indicator will enhance productivity and reduce cost of ownership. Increase profits with the most dependable and durable equipment in the industry.
Features
PreVent™ breather vent
Storage for up to 50 IDs
Unit of measure: kg, gm, lb, oz, lb/oz
LED display, 0.8 in, six-digit, 14-segment
Two full duplex serial ports
Configurable print formats
Audit trail tracking
Optional communications: Ethernet, USB or fiber optic
Four configurable digital I/O
Reflash memory to upgrade firmware
Auto print capability
Piezo keypad consisting of zero, units, print, tare, over, under, ID, target, enter, menu, power
304 stainless steel, IP69K rated
Battery backed time and date
Accumulator
Specifications
Power-AC:
Line voltages:
115/230 VAC
Frequency:
50/60 Hz
Fused at 2.5A
Power Consumption:
1.5 A at 115 VAC (8 W),
0.75 A at 230 VAC (8 W)
Excitation Voltage:
+5VDC 8 x 350 Ω or 16 x 700 Ω load cells
Analog Signal Input Range:
-0.5 mV/V + 4.5 mV/V
Analog Signal Sensitivity:
0.3 μV/graduation minimum, 1.5 μV/graduation recommended
Measurement Rate:
960, 480, 240, 120, 60, 30, 15, 7.5 per second
System Linearity:
±0.01% full scale
Digital I/O:
Four channels on CPU board
Circuit Protection:
RFI, EMI, EFT, ESD and surge protection
Display:
Large 0.8 in, 14-segment, six-digit high-intensity red
LED display
Status Annunciators:
Designators for %, kg, gm, lb, oz, center of zero, Gross/Brutto, N, T, PT, neg, motion
Operating Temperature:
Legal: 14º F to 104º F (-10º C to 40º C)
Rating/Material:
IP69K, stainless steel
Display Resolution:
100,000 graduations maximum
Load Cell:
IP69K, stainless steel, hermetically sealed
Warranty:
Three-year limited warranty
Approvals:
Indicator:
NTEP CC 08-092, Class III/IIIL 10,000 d
Measurement Canada AM-5710, Class III 10,000 d
OIML R76/2006-GBI-10.02
TC11569
T10807
UL and CUL listed
CE marked
Scale:
NTEP CC 95-072, Class III 5,000 d
Measurement Canada AM-5082, Class III 5,000 d
NSF