TradeRoute™ HL Series
Legal for Trade Onboard Weighing System
Improve Profitability
Instead of driving to a local approved truck scale to weigh, add TradeRoute Systems to your existing delivery or collection vehicles. On site billing for materials delivered or collected eliminates guesswork and increases efficiency and customer satisfaction.
Easy to Use
With TradeRoute, weighing is a one-person operation. Hydraulics lift the container off the truck frame and within about five seconds you are ready to begin your weight transaction. The 920i® electronics center user interface sets up quickly and the display prompts walk you through weighing transactions and ticket printouts.
Easy to Install
TradeRoute is a low-profile, on-board weighing system that bolts onto your existing straight truck frame. The system is complete with required hardware and simple installation instructions. Your existing truck frame is not modified. Connect the included line locks to the existing hydraulic pump to allow the scale to lift in and out of weighing mode.
Legal for Trade Weighing Anywhere
Weigh on slopes up to six degrees off level and get accurate weights. The 920i electronics center includes an inclinometer that continuously displays pitch and roll in normal weighing mode. When used in NTEP Certified Class III and IIIL applications, you are assured TradeRoute is the most economical and profitable accessory to your delivery and pick-up fleet.
Features
Legal for Trade Onboard System Includes:
3- or 4-point onboard system RL20000 load cell with 20 ft cable, IP67
80-ft conduit cable
Magnetic transport alarm sensor with 15 ft cable
JB4SS junction box
Hydraulic line locks and hoses
920i® Onboard Weigh Center
Hydraulic pump not included
Minimum 3,000 PSI recommended to maintain 2,200 PSI during lift
920i Onboard Weigh Center:
Epson® TM-U295 printer with splash shield
Pre-installed 30 ft power cable
Pre-installed 30 ft load cell cable
Pre-installed inclinometer
Transport alarm LEDs
Power switch
Start/End switch
Waterproof enclosure
Vibration mounts
Mounting bracket to body not included
920i USB Universal with Onboard Software:
RS-232 port for connecting to ticket printer
Standard onboard software
USB interface board only
USB Interface Functions:
Available upon special request using a Type A sealed connector
USB interface card on Port 2
Supports weigh mode and configuration mode functions
Supports upload of databases and 920i configuration file
Supports download of databases, 920i configuration file, iRite®, COD file and firmware file
Sanity checks for command errors
Create STD database files
Flash Drives:
Supports USB 2.0 (optional)
Create subdirectories by unit ID and database name
Use the root directory for generic files
Approvals:
NTEP CC 99-091
Measurement Canada AM-4847
Specifications
Power:
Line voltages: 115 or 230 VAC, 9-36 VDC, +/- 6, 25 Watt input
Frequency: 50 or 60 Hz
Power consumption: 340 mA, maximum at 115 VAC (26 W) 240 mA at 230 VAC (26 W)
Excitation Voltage:
10 ± VDC, 16 x 350 Ω or 32 x 700 Ω load cells per A/D card
Analog Signal Input Range:
-10 mV to +45 mV
Analog Signal Sensitivity:
0.3 μV/graduation minimum at 7.5 Hz
1.0 μV/graduation typical at 120 Hz
4.0 μV/graduation typical at 960 Hz
A/D Sample Rate:
7.5 to 960 Hz, software selectable
Resolution:
Internal resolution: 8 million counts
Weight display resolution: 9,999,999
System Linearity:
± 0.01% full scale
Digital I/O:
Six I/O channels on CPU board; optional 24-channel
I/O expansion boards available
Circuit Protection:
RFI, EMI, ESD protection
Serial Ports:
Four ports on CPU board support up to 115,200 bps; optional dual-channel serial expansion boards available< br /> Port 1: Full duplex RS-232
Port 2: USB Type A and Type B connectors
Port 3: Full duplex RS-232, 20 mA output
Port 4: Full duplex RS-232, 2-wire RS-485, 20 mA output
Display (W x H):
4.6 x 3.4 in (116 W x 86 mm H), 320 x 240 pixel VGA Liquid Crystal Display (LCD) module with adjustable contrast
Keyboard:
27-key membrane panel, tactile feel
Operating Temperature:
Legal: 14°F to 104°F (-10˚C to 40˚C)
Industrial: 14°F to 122°F (-10˚C to 50˚C)
Weight:
45 lb, weigh center
Rating/Material:
NEMA Type 4X/IP66, stainless steel
Indicator Approvals:
Indicator Approvals: NTEP CC 01-088, Class III/IIIL 10,000d Measurement Canada AM-5426, Class III/III HD 10,000d
OIML UK 2658, 6,000/10,000
CE marked
UL & C-UL listed (Universal, Deep and Wall Mount Enclosure)
Warranty
Two-year limited warranty