top of page

MSI-7000 and 7001 TranSend™ Wireless Load Cell Interface

MSI-7000 and 7001 TranSend™ Wireless Load Cell Interface

Download Detailed Brochure

A Simple and Efficient Load Cell Interface

From the initial weighment on the scale to the final numeric value on the indicator, efficient communication is key to the success of the entire operation. Whether it’s overhead, livestock, tank, or heavy capacity weighing, once your traditional conduit is damaged or needs to be replaced, communication is halted and so is your operation. The MSI-7000 and 7001 TranSend not only solves issues resulting from traditional conduit, it also exceeds communication application expectations.

From the brand you know and trust for expert integrated solutions, MSI has designed both the 7000 and 7001 TranSend to transform the signal of one or more load cells and transmits that data wirelessly to a receiving unit. TranSend is fully compatible with a broad range of receiving devices including MSI-8000, MSI-8000HD, any other digital weight indicator, PC, PLC, or other industrial device. Housed in a rugged IP-66 NEMA Type 4 enclosure, TranSend is suitable for most indoor and outdoor environments with an operating distance of up to 300 feet.

Select from the basic functionality of single-channel models, or upgrade to the expanded capabilities of multi-channel models. Multi-channel devices offer up to three optional relay contacts, audible alarm, and can function as a smart junction box. In the event of a load cell failure, TranSend can automatically compensate and transmit a service warning, and compensate for that load cell until it is repaired.

The MSI 7000 and 7001 TranSend transforms the way your devices communicate between one another. Upgrade your current communication process by eliminating expensive conduit and replacing it with TranSend.


  • Works with any basic digital weight indicator

  • Excitation to load cell(s) provided by the transmitter, not the indicator

  • Each transmitter/receiver set is individually paired

  • Auto-off mode - selectable for 15, 30, 45, 60 minutes or off

  • Auto-sleep mode - power down during non-use, power up with weight change or key press

  • Serial communication cable included with all transmitters

Additional HD Features

  • IP68 milled aluminum enclosure

  • Second radio modem available


5-6 VDC, 7-36 VDC 85-265 VAC

Excitation Voltage:
Transmitter: +4.8 VDC, 16x 350Ω or 32x 700Ω load cells

Standard Antenna:
1/2 wave 2dBi, articulated

Direct sequence spread spectrum at 2.4 GHz, 802.15.4

Effective Range:
100 ft or more

Digital I/O:
Three coil relays available on select models and 7000HD units

Circuit Protection:
RFI, EMI, ESD protection

Serial Port:
Full duplex RS-232

Operating Temperature:
-40°F to 185°F (-40°C to 85°C)

NEMA Type 4 (IP66), aluminum black powder coated (excludes wall cube model)
7000HD and 7001HD: IP68

Additional RF Options:
Cellular (consult)
802.15.4 FHSS

One-year limited warranty

bottom of page